很遗憾,因您的浏览器版本过低导致无法获得最佳浏览体验,推荐下载安装谷歌浏览器!

Fujian computer flat machine, computer flat machine manufacturers, flying knitting computer flat machine, Ming hao machinery

2019-07-13  From: Minghao Machinery Technology Co., Ltd. Browsing times:12

One, computer flat machine from right to left that is, from the end of the comb, so in the rib rotation on thin needle idling weave 1.5 rotation, coarse needle is rib rotation weave how many.




2. The odd-even property of opening needle should match the pattern and keep the symmetry of the pattern;




Three, because the rib tissue and the big body big difference needs to be in the turning needle position and needle number should not exceed 1/3 of open needle;




Four, for the color, should be marked at the end of the color; For the pit strip sweater, mark the stitch number of the edge pit in the key parts, such as the end of the comb and the needle putting. For the wringing flower, should indicate the number of each wringing flower;




Five, after the flat flat machine needs at least 0.5 rotation, then the needle; If it is dark harvest, regardless of the needle seed, are made into a 1 1 harvest;




Six, computer flat machine do stop needle (also known as shovel needle), the revolution should not exceed 4CM, if necessary, section doffing off;




Seven, some pieces need to harvest straight edge, but even with 0.5 turn, and then 1 turn, out from always not straight, the computer flat machine is can 0.5 turn and put once, and then 1 turn and put once, such a cycle and put, you can achieve a straight line;




Eight, and in the picture between the pattern or marking, if according to the hand flat machine format such as "how many times the flower" or "how many times the needle in... ", make plate master to have a headache, he wants to calculate to which is how many turn, ability good localization, correct should be




Give the revolution number directly, such as "how many rolls in the collar on the foot", "or how many turning heads on the foot or how many points are left in the tail of the plane to mark", etc.;




Nine, the computer flat machine is not at the end of the piece of needle all over, must have a 3, 5 needles to go;




10. With some flaps, the STOLL machine can provide segment density control at the flaps, but the other machines don't seem to work, which can be achieved by stealing revolutions at the flaps




Eleven, because of the computer flat machine cover wire hole organization, the edge needle is easy to flower and silk reverse, so you can do for the tooth to do for the tooth, is not recommended to cancel cover wire;




12, rami to the bottom of all the organization to complete, computer flat machine is electronic control of the density, can be such as "how much the surface of the bottom of the tightness" to express, convenient for the mechanic adjustment, control;




13, because of the computer flat machine pattern of the baht, so the size of the light after kneading shrinkage can not control the density, should be pulled close, hanging long, combined with the kneading shrinkage film can be more accurate control.




Company: fujian minghao machinery technology co., LTD




Contact: Mr. Lin, 139-598-828-38




Address: no. 1, kaiyuan road south, jiangtou village, chentai town, jinjiang city

Keywords: MInghao           

Minghao Machinery Technology Co., Ltd.,Monopoly 3D Flyknit Computer flat knitting machine Fly knitting accessories Fly knitting vamp Tourist shoes Sweater Casual shoes And other business,Interested customers please contact us,Phone:13959882838

CopyRight © All Rights Reserved: Minghao Machinery Technology Co., Ltd. Site Map XML


Follow us